Programmable Softkeys - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Programmable Softkeys

The Cisco SPA300 Series and Cisco SPA500 Series IP phones (models with
display screens) have four softkeys on the screen that, when pressed, perform
certain actions.
You can customize the softkeys displayed on the phone, and create your own
softkeys for speed dials or XML scripts. Customized softkey information is entered
in the PSK1 through PSK6 fields. (See
information.)
Parameter
Programmable
Softkey Enable
Idle Key List
Missed Call Key List
Off Hook Key List
Dialing Input Key List
Progressing Key List
Connected Key List
Start-Xfer Key List
Start-Conf Key List
Conferencing Key List
Releasing Key List
Hold Key List
Ringing Key List
Customizing Phone Softkeys
Description
Enables programmable softkeys (Cisco SPA525G or
Cisco SPA525G2 only).
Softkeys that display when the phone is idle.
Softkeys that display when a call has been missed.
Softkeys that display when the receiver is lifted, or the
headphone or speakerphone buttons are pressed.
Softkeys that display when the user must enter dialing
data.
Softkeys that display when a call is attempting to
connect. (Cisco SPA525G or Cisco SPA525G2 only)
Softkeys that display when a call is connected.
Softkeys that display when a call transfer has been
initiated.
Softkeys that display when a conference call has been
initiated.
Softkeys that display when a conference call is in
progress.
Softkeys that display when a call is disconnecting.
(Cisco SPA525G or Cisco SPA525G2 only)
Softkeys that display when one or more calls are on
hold. (Cisco SPA525G or Cisco SPA525G2only)
Softkeys that display when a call is incoming.
A
for more
290