Cisco 521SG - Unified IP Phone VoIP Administration Manual page 252

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
SIT2 Tone
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Holding Tone
Conference Tone
Description
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.274/
0/1,.274/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.380/
0/1,.380/0/2,.380/0/3,0/4/0)
This is an alternative to the Reorder Tone played
when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is
configurable on the IP phone screen.
Defaults to 985@-16,1371@-16,1777@-16;20(.380/
0/1,.274/0/2,.380/0/3,0/4/0).
Played instead of the Dial Tone when there are
unheard messages in the caller's mailbox.
Defaults to 350@-19,440@-19;2(. 1 /. 1 /1+2);10(*/0/
1+2).
Played when all calls are forwarded.
Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/
1+2).
Informs the local caller that the far end has placed
the call on hold.
Defaults to 600@-19*(. 1 /. 1 /1,. 1 /. 1 /1,. 1 /9.5/1).
Played to all parties when a three-way conference
call is in progress.
Defaults to 350@-19;20(. 1 /. 1 /1,. 1 /9.7/1).
A
251