Led Script - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Configuring LED Patterns
STEP 3

LED Script

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameters
Disabled LED
Registering LED
Call Back Active
LED
Click Submit All Changes.
The LED script describes the color and blinking pattern of a Line Key LED. Each
script contains a number of fields separated by a semicolon(;). White spaces are
ignored. Each field has the syntax <field-name> = <field-value>. The allowed field-
name and corresponding field-values are listed below:
c=o|r|g|a
This field sets the color of the LED. The 4 choices are:
• o = off
• r = red
• g = green
• a = amber (orange)
p=n[b]|s[b]|f[b]|d[b]|u[d]
This field sets the blinking pattern of the LED. The 4 choices are:
• nb = no blink (steady on or off)
• sb = slow blink (1s on and 1s off)
• fb = fast blink (100ms on and 100ms off)
• ud = user-defined (according to the contents of the u field)
Description
Call Appearance is disabled (not available for any
incoming or outgoing call). Leaving this entry blank
defaults to c=o.
The corresponding extension tries to register with the
proxy server.
Defaults to blanks (c=r;p=s).
Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
9
208