Distinctive Ring Patterns - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Secure Call Indication Tone
Page Tone
Alert Tone
System Beep

Distinctive Ring Patterns

Parameter
Cadence 1
Cadence 2
Cadence 3
Description
Played when a call has been successfully
switched to secure mode. It should be played only
for a short while (less than 30 seconds) and at a
reduced level (less than -19 dBm) so it does not
interfere with the conversation.
Defaults to 397@-19,507@-19;15(0/2/0,.2/. 1 /1,. 1 /
2. 1 /2).
Specifies the tone transmitted when the paging
feature is enabled.
Defaults to 600@-16;.3(.05/0.05/1).
Played when an alert occurs.
Defaults to 600@-19;.2(.05/0.05/1).
Audible notification tone played when a system
error occurs.
Defaults to 600@-16;. 1 (.05/0.05/1).
Cisco SPA525G or
NOTE Applies to
Cisco SPA525G2 Cisco WIP310 only
or
Description
Cadence script for distinctive ring 1.
Defaults to 60(2/4).
Cadence script for distinctive ring 2.
Defaults to 60(.3/.2, 1/.2,.3/4).
Cadence script for distinctive ring 3.
Defaults to 60(.8/.4,.8/4).
A
.
252