8
Vertical Service Announcement Codes (SPA 9X2 only)
158
Configuring Regional Parameters and Supplementary Services
Activating or Deactivating Supplementary Services
You can disable services handled locally by the phone in one of two ways:
•
Delete the star code in the
Regional tab.
•
Disable the service in the
Services (Star Codes), page
A supplementary service should be disabled if
•
the user has not subscribed for it
or
•
the service provider intends to support similar service using other means
than relying on the Cisco IP phone.
SPA9x2 phones support all services that can be activated on a phone (call
forward, do not disturb, and so on). Vertical service announcement codes apply
only when the user dials the corresponding star code.
Vertical Service Announcement Codes (SPA 9X2 only)
Vertical Service Activation
Phone
tab. See
153.
NOTE: If a service is enabled in the
Regional
but cleared in the
still be enabled/disabled by the end- user from
the phone LCD or the web UI. If a service is
disabled, the soft button associated with that
service is hidden on the LCD. Also, any menu
item associated with a disabled service is
preceded with an exclamation mark (!).
Cisco SPA and Wireless IP Administration Phone Guide
section in the
Configuring Supplementary
Phone
tab
tab, the service can