Digit Sequence Examples - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Configuring Dial Plans
About Dial Plans
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Digit Sequence Examples

The following examples show digit sequences that you can enter in a dial plan.
In a complete dial plan entry, sequences are separated by a pipe character (|), and
the entire set of sequences is enclosed within parentheses:
( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! |
9, 011xxxxxx. | 0 | [49]11 )
Extensions on your system:
( | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
[1-8]xx
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx
! | 9, 011xxxxxx. | 0 | [49]11 )
[1-8]xx
Allows a user dial any three-digit number that starts with the digits 1
through 8. If your system uses four-digit extensions, you would instead enter
the following string:
Local dialing with seven-digit number:
( [1-8]xx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx
! | 9, 011xxxxxx. | 0 | [49]111)
9, xxxxxxx
After a user presses 9, an external dial tone sounds. The user can
enter any seven-digit number, as in a local call.
Local dialing with 3-digit area code and a 7-digit local number:
( [1-8]xx | 9, xxxxxxx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx
! | 9, 011xxxxxx. | 0 | [49]11 )
9, <:1>[2-9]xxxxxxxxx
required. After a user presses 9, an external dial tone sounds. The user must
enter a 10-digit number that begins with a digit 2 through 9. The system
automatically inserts the 1 prefix before transmitting the number to the
carrier.
Local dialing with an automatically inserted 3-digit area code:
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx
|
8, <:1212>xxxxxxx
! | 9, 011xxxxxx. | 0 | [49]11 )
[1-8]xxx
9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
9, <:1>[2-9]xxxxxxxxx
This example is useful where a local area code is
| 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx
8
| 8,
198