Cisco 521SG - Unified IP Phone VoIP Administration Manual page 26

Getting Started
Viewing Phone Information
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Reason
System n
IP Changed
The following is a list of the supported reboot/refresh reasons (Cisco SPA525G or
Cisco SPA525G2):
Reason
Upgrade
Provisioning
SIP Triggered
RC
User Triggered
Software Req
System n
IP Changed
You can view the reboot history from the phone web user interface, the IP phone
screen, and the phone SPA Status Dump file (http://phoneIP/status.xml or http://
phoneIP/admin/status.xml).
Description
The reboot was triggered by system events (for
example, running out of resources).
The reboot was triggered after the phone IP address
was changed.
Description
The reboot was a result of an upgrade operation
(regardless whether the upgrade completed or
failed).
The reboot was the result of changes made to
parameter values via the IP phone screen or phone
web user interface, or as a result of synchronization.
The reboot was triggered by a SIP request.
The reboot was triggered as a result of remote
customization.
The user manually triggered a warm reboot.
The warm reboot was triggered by a remote server.
The reboot was triggered by system events (for
example, running out of resources).
The reboot was triggered after the phone IP address
was changed.
1
25