Programmable Softkeys - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Customizing Standard Features
Customizing Phone Softkeys
STEP 4
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click Submit All Changes.

Programmable Softkeys

The Cisco SPA300 Series and Cisco SPA500 Series IP Phones provide six
programmable softkeys (fields PSK 1 through PSK 6). These keys can be defined
by either a speed dial script or an XML service script.
To configure programmable softkeys:
Click Admin Login > advanced > Voice > Phone.
(Cisco SPA525G or Cisco SPA525G2 only) Under Programmable Softkey Enable,
choose yes to enable.
To configure a speed dial script, enter the following in the PSK field:
fnc=sd;ext=extensionname@$PROXY;vid=outboundextnum;nme=name
fnc
where is the function of the key (speed dial), ext (
extension being dialed,
outbound call is sent, and
Vertical service activation codes (* codes) are supported in speed dial
configurations.
The name field displays on the softkey on the IP phone screen. Cisco recommends
a maximum of 8 characters for a Cisco SPA30X or Cisco SPA50X phone and 10
characters for a Cisco SPA525G or Cisco SPA525G2 phone. If more characters
are used, the label can be truncated on the IP phone screen.
To configure an XML script, enter the following in the PSK field:
fnc=xml;url=http://scriptURL.xml;nme=scriptname
fnc
where is the function of the key (an XML script),
where the script is located, and
scriptname
The field displays on the softkey on the IP phone screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA300 Series or
Cisco SPA500 Series phone and 10 characters for a Cisco SPA525G or
Cisco SPA525G2 phone. If more characters are used, the label can be truncated
on the IP phone screen.
vid
is the extension on the calling phone from which the
name
is the name of the speed dial being configured.
scriptname
is the name of the script.
extensionname
) is the
scriptURL.xml
is the URL
3
65