Screen (Cisco Spa525G Or Cisco Spa525G2) - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Handset Volume
Headset Volume
Bluetooth Volume

Screen (Cisco SPA525G or Cisco SPA525G2)

Parameter
Screen Saver Enable
Screen Saver Type
Screen Saver Trigger
Time
Screen Saver Refresh
Time
Sets the default volume for the handset.
Sets the default volume for the headset.
Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA525G or Cisco SPA525G2
only.
Description
Enables a screen saver on the IP phone screen. When
the phone is idle for a specified time, it enters screen
saver mode. (Users can set up screen savers directly
using phone Setup button.) Any button press or on/off
hook event triggers the phone to return to its normal
mode. (The screen shows "Press any key to unlock
your phone.") If a user password is set, the user must
enter it to exit screen saver mode.
Choose the type of screen saver:
Black Background—Displays a black screen.
•
Gray Background—Displays a gray screen.
•
Black/Gray Rotation—The screen incrementally cycles
•
from black to gray.
Picture Rotation—The screen rotates through available
•
pictures on the phone.
Digital Frame—Shows the background picture.
•
Number of seconds that the phone remains idle before
the screen saver turns on.
Number of seconds before the screen saver should
refresh (if, for example, you chose a rotation of
pictures).
A
314