Chapter 9: Configuring Led Patterns - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Configuring LED Patterns
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can customize the LED patterns for the line keys.
To configure Line Key LED patterns:
Click Admin Login > advanced > Voice > Phone
Under Line Key LED Pattern, use the following letters to customize the fields
shown in the following table:
• p indicates pattern: the blinking pattern of the LED
• c indicates color: the color setting of the LED
• r indicates red: a red-colored LED
• g indicates green: a green-colored LED
Parameters
Idle LED
Remote Undefined
LED
Local Seized LED
Description
The line is idle.
Defaults to blank (c=r).
The Remote Undefined state pattern, where the shared
call state is undefined (the phone is still waiting for the
state information from the application server). Not
applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value of c=r;p=d.
This phone seized the call appearance in preparation for
a new outbound call.
Defaults to blank (c=r).
9
206