Cisco 521SG - Unified IP Phone VoIP Administration Manual page 208

Configuring LED Patterns
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameters
Remote Seized LED
(applicable only to
shared call
appearance)
Local Progressing
LED
Remote
Progressing LED
(applicable only to
shared call
appearance)
Local Ringing LED
Remote Ringing
LED (applicable
only to shared call
appearance)
Local Active LED
Remote Active LED
(applicable only to
shared call
appearance)
Local Held LED
Remote Held LED
(applicable only to
shared call
appearance)
Register Failed LED
Description
The shared call appearance was seized by another
phone.
Defaults to blank (c=r; p=d).
This phone attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Another phone attempts an outbound call on this shared
call appearance.
Defaults to blank (c=r; p=d).
The call appearance is ringing.
Defaults to blank (c=r;p=f).
The shared call appearance is in ringing on another
phone.
Defaults to blank (c=r;p=d).
The call appearance is engaged in an active call.
Defaults to blank (c=r).
Another phone is engaged in an active call on this shared
call appearance.
Defaults to blank (c=r;p=d).
The call appearance is held by this phone.
Defaults to blank (c=r;p=s).
Another phone placed this call appearance on hold.
Defaults to blank (c=r,p=s).
The corresponding extension has failed to register with
the proxy server. Leaving this entry blank defaults to c=a.
9
207