Patient Data Management; Overview; Admitting A Patient - GE Healthcare B30 User's Reference Manual

7 Patient data management

Overview

The monitor continuously saves patient data, such as trends. Saving is activated once the
patient is admitted. The monitor saves automatically.
−
−
All the data can be printed through network and saved to the network for monitor memory.

Admitting a patient

Monitoring of a new patient is started by admitting the patient. After the patient has been
admitted, you can start monitoring and trend gathering. To admit the patient:
Admit/Discharge
1.
2. Select Admit Patient and enter the patient data. Select letters and numbers by turning
and pushing the ComWheel (max. 14 characters or numbers for each name and ID).
Admit/
Discharge
NOTE: Always observe the monitor and the patient carefully during start-up periods.
In the monitor memory the most recent patient data up to 72 hours if the network is
not in use.
In the network the most recent patient data up to 72 hours from 2 to 90 days
depending on the configuration.
key.
Patient data management
7-1