Entering Patient Data - GE MAC 1200 Operator's Manual

Entering Patient Data

Revision C
Preparing for ECG Recording: Entering Patient Data
It is possible to enter patient data and have them annotated on the
recording for easy archiving of patient records.
„
Press to enter the patient data mode.
The recorder displays the menu items in a defined order. In the
configuration menu (Chapter 10,
section for details) you determine the items to be included in the
menu (In the table on the next page, the items that appear in the
patient data menu in the default configuration are marked as Yes
in the Menu item displayed column, the other menu items are
marked as No.
To skip a menu item, press
It is not possible to write capital and small letters (do not press
the Shift key). For entry of numbers (e.g. date of birth), it is not
necessary to press the Shift key.
For fields that allow alphanumeric entries the NumLock function
can be enabled with
right corner of the display).
All entries must be confirmed with
Press or
127(
Please refer to the Appendix for instructions on entering special
characters.
MAC 1200/1200 ST
2012250-021
"Patient Data Menu Setup"
or the cursor key
(the symbol appears in the upper
.
to exit the patient data mode.
or .
4-11