Figure 9-1
To remove the water trap, push the trigger above the water trap. The water trap is spring-
loaded. The message 'Check D-fend' is displayed.
•
Detach the container from the water trap cartridge by pulling it carefully downward.
•
Empty and clean the container.
•
Attach the container tightly back into the cartridge.
•
Push the whole unit into its housing on the front panel until the latch is set.
•
Press the
fend' disappears.
Other accessories
See the accessory package for instructions for how to clean and check them. Do not reuse
single-use disposable accessories.
Emptying the water trap container
Normal Screen
key to restart monitoring. Check that the message 'Check D-
Cleaning and care
9-7