Starting Relearning Manually; Setting Heart Rate Alarm Limits - GE Healthcare B30 User's Reference Manual

Starting relearning manually

When the patient's ECG pattern changes considerably, the monitor should start relearning a
new ECG pattern. The pattern changes, for example, when changing the patient's position. To
start relearning manually:
1. Press the
2. Select Relearn.
ECG

Setting heart rate alarm limits

To set the heart rate alarm limits:
1. Press the
2. Select ECG Alarms.
3. Select Adjust Limits.
You can also adjust the limits through
see section
ECG
ECG
key.
ECG
key.
"Alarms."
Alarms Setup
- Adjust Limits. For detailed instructions,
ECG
11-9