Cerebral Perfusion Pressure; Adjusting Alarm Sources And Limits - GE Healthcare B30 User's Reference Manual

Table 14-1
LABEL
Scale mmHg/kPa
Color
Alarm source
Digit format
Filter (Hz)
Response

Cerebral perfusion pressure

Cerebral Perfusion pressure CPP is calculated by subtracting ICP mean pressure from Art mean
pressure.
CPP mean is displayed next to the ICP value.
NOTE: Set the Label of the channel to ICP, and the Digit Format to CPP.

Adjusting alarm sources and limits

You can adjust or turn off pressure alarm limits in the Alarms Setup/Adjust Limits menu. Enter
the menu by pressing the
For each pressure channel you can choose as a source Sys (Systolic), Dia (Diastolic), Mean or
Off. Note that you can choose one or both sources to be active at a time.
Alarms
Setup
For more information about alarms and adjusting, see section
Invasive blood pressure labels and descriptions
P1, Art, P2, CVP RAP, LAP
ABP
200/30 20/3
Red Blue
Sys Mean
S/D Mean
22 9
normal normal
Alarms Setup
ICP
20/3 20/3
White White
Off Off
Mean CPP
9 9
normal normal
key.
"Alarms."
Invasive blood pressure
PA RVP
60/8 60/8
Yellow White
Off Off
S/D S/D
9 9
normal normal
14-7