Co2 Setup Menu; Selecting Alarm Sources - GE Healthcare B30 User's Reference Manual

CO setup menu
2
Airway
Gas
Scale Allows you to select the following scales:
scale options for %
0-6%
0-10%
0-15%
0-20%
FiO2 Level Selects the FiO
increase the measurement accuracy. Make sure the level is set if the FiO
40%.
Unit Selects the CO
Resp Rate Source
You can select the rate to be calculated from the ECG leads (impedance measurement) or the
CO measurement. If you select AUTO, the rate is automatically calculated from the measured
2
CO . If impedance measurement is present and the source is AUTO, the respiration rate
2
calculation switches back to impedance respiration if you press the
during an Apnea alarm.
CO2 Alarm Opens the CO
Resp Rate Alarm
Opens the Resp Rate Alarms Adjustment menu to change the respiration rate alarm limits.
Previous Menu Returns to the previous menu.

Selecting alarm sources

To select alarm sources, go to the CO2 Setup menu's submenu CO2 Alarm. The selections are
FI or ET as the high and low alarm limit.
scale options for kPa
0 - 6 kPa
0 - 10 kPa
0 - 15 kPa
0 - 20 kPa
level. The FiO level is used in gas compensations of the CO
2 2
display unit: %, kPa or mmHg.
2
Alarms Adjustment menu to change the CO
2
scale options for mmHg
0 - 50 mmHg
0 - 80 mmHg
0 - 100 mmHg
0 - 160 mmHg
Silence Alarms
alarm limits.
2
Airway gas (CO2)
measurement to
2
level is higher than
2
key
17-5