Changing The Startup Mode; Renaming A Mode; Loading Modes - GE Healthcare B30 User's Reference Manual

Changing the startup mode

1. Select
2. Select Startup Mode - 1, 2, 3, 4, 5, or 6.

Renaming a mode

1. Select
2. Select the mode, select Name and give a new name.

Loading modes

1. Select
2. Select Load Modes and one of the following:
•
•
Monitor Setup
- Install/Service - Save Modes. Enter the password.
-
Monitor Setup
Install/Service - Save Modes. Enter the password.
-
Monitor Setup
Install/Service - Save Modes. Enter the password.
From Network: Loads all modes from network and saves them in monitor's
permanent memory.
To Network: Copies all modes from monitor's permanent memory to network. This
selection is available only if saving modes to network is enabled in Central
Monitor setup
5-7