Replacing The Batteries - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor
Checking the battery charge when the monitor is turned off
Figure 2-12 Charging indicator on the battery

Replacing the batteries

Check the monitor indicators regularly to see if either one of the batteries needs to be changed.
Battery capacity indicators in the upper right corner tell you when you should replace a
battery, and which one is out of charge, missing or not working. You can replace one battery at
a time.
To replace a battery:
1
Figure 2-13 Inserting a battery
(1) Open the lid of the battery compartment located behind the handle by sliding it to the
left.
(2) Lift up the battery you want to change. Check the indicators and messages on screen to
make sure that you change the battery with lower charge.
(3) Push in the new battery. Make sure that the charging indicator is facing forward and push
the battery down all the way. Check the monitor indicators.
CAUTION After replacing a battery, always make sure to close the battery compartment
by sliding the lid back to the right until it clicks.
2-14
When the monitor is turned off, you can
check the battery charging level by
pressing the test button on the battery
as indicated in the drawing on the left.
The charging indicator bar (1) lights up
and the number of lit segments
indicates the charging level: the more lit
segments, the higher the charging level.
1
2
3