Enabling Or Disabling Alarm Silencing; Disabling The Alarm Light - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor

Enabling or disabling alarm silencing

With this selection, you can determine whether the audible alarms can be turned off or not.
1. Press the
2. Select Install/Service and enter the password.
3. Select Installation - Alarm Options.
4. Select Show Audio ON/OFF and YES to enable alarm silencing or NO to disable it.
Monitor
Setup

Disabling the alarm light

By default, the
currently active alarm. If several alarms are active at the same time, the color follows the
highest priority alarm.
To disable the alarm light:
1. Press the
2. Select
3. Select
4. Select
Monitor
Setup
4-14
Monitor Setup
key.
Alarm Light
has been enabled. The light flashes red or yellow according to the
Monitor Setup
key.
Install/Service
and enter the password.
Installation Alarm Options
-
Alarm Light NO
- .
.