Configuring Trends; Configuring Trend Pages; Setting Trend Length; Setting Trend Scales - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor

Configuring trends

Configuring trend pages

You can change the parameters on the trend fields:
1. Press the
2. Select Install/Service and enter the password.
3. Select Trends and select Graphical Trends.
4. Select the trend page that you want to change.
5. Select graphical parameters for each field.
The field numbers start from the top of the screen. Select one parameter for each field on the
trend page, or turn the field OFF. When all the fields are OFF, the page is displayed with empty
fields. The time scale and page number appear at the bottom of the page.
If several similar fields are selected on top of each other, they form one higher field. Equal fields
cannot be defined separate to each other.
NOTE: You cannot make changes in numerical trend page configuration.

Setting trend length

1. Press
2. Select Trends - Graphical - Time Scale and select 20min, 1h, 2h (default), 4h, 6h, 8h, 10h,
12h, 24h, 36h, 48h or 72h.

Setting trend scales

You can change the scale for HR, ST, PVC, SpO
1. Press
2. Select Trends - Graphical - Trend Scales and adjust the scales.

Setting the default trend

You can select graphical or numerical trends to be displayed by default:
1. Press the
2. Select Install/Service and enter the password.
3. Select Trends.
4. Select Default Trend and Graph or Num.
5-14
Monitor Setup
key.
Pt. Data & Trends
.
Pt. Data & Trends
.
Monitor Setup
key.
and temperature trends.
2