Setting Time And Date; Battery Setup - GE Healthcare B30 User's Reference Manual

B30 Patient Monitor

Setting time and date

The time is shown in the upper right corner of the screen. Turning off the monitor does not
affect the clock.
1. Press
Monitor
Setup
2. Turn and push the ComWheel to set the time and date:
−
−
NOTE: If the monitor is connected to the Central, the monitor follows the Central's time settings
and the Time and date menu is not available.

Battery setup

Through this menu you can check the battery status:
1. Press the
2. Select Battery Setup. Battery information is now available.
5-2
Monitor Setup
and select Time and date.
Hours, minutes and seconds.
Day, month and year.
Monitor Setup
key.