Advertisement
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
SUPERSEDES shows that the part replaces the part number or item number shown
and is not interchangeable.
REPLACED BY shows that the part is replaced by the part number or item number
shown and is interchangeable. Part can be used until the supply is gone.
REPLACES shows that the part replaces the part number or item number shown
and is interchangeable.
PRE SERVICE BULLETIN XXXX shows that the part is used if service bulletin
XXXX was not done.
POST SERVICE BULLETIN XXXX shows that the part is used if service bulletin
XXXX was done.
PRE SPARE PARTS BULLETIN XXXX shows that the part is used if spare parts
bulletin XXXX was not done.
POST SPARE PARTS BULLETIN XXXX shows that the part is used if spare parts
bulletin XXXX was done.
NONREPAIRABLE shows that the part cannot be repaired.
NONPROCURABLE shows that the part or assembled parts cannot be purchased
and no part number exists for the assembly. The components of the assembled
parts can be ordered unless differently specified.
ORDER NEXT HIGHER ASSEMBLY shows that the part number is part of a
matched set and cannot be ordered independently. The next higher assembly
can be ordered.
REFERENCE (GAREF, TUCREF, AIREF, TORREF etc.) shows the procurable
part number that exceeds 15 digits in the NOMENCLATURE column as ORDER
PN NNNN.
ORDER PART NUMBER shows a nonstandard or reference part number.
PART ADDED shows the part is added with no comparable component involved
in the change. Interchangeability of other parts is not affected by the additions,
unless specified.
DELETED shows the part is not available for use.
SEE FIGURE FOR DETAILS shows the part number details in a different figure.
SEE FIGURE FOR NEXT HIGHER ASSEMBLY refers the part number to the
next higher assembly.
USE WITH (ITEM or PART NUMBER) shows a part is used with a different part.
COMPONENT OF (ITEM or PART NUMBER) shows that the part is a component of
a different part.
MAY BE SUBSTITUTED shows that the part in the NOMENCLATURE column with
its vendor code is an equivalent alternative for the part in the PART NUMBER
column.
REFER TO ATA or PUBLICATION NUMBER identifies the assemblies that have
their own Component Maintenance Manuals. These entries are also shown in the
INTRODUCTION (PGBLK 33-30-15-0) of this manual under References.
Control Source Drawing (CSD) shows the Honeywell part number for the part in the
PART NUMBER column and is fully interchangeable.
33-30-15
Page 10004
30 Mar 2017
Advertisement
