Advertisement
Table INTRO-2. MTOSS Function Code Definitions (Cont)
Function
Code
630
Depreserving
640
Lubricating
650
Unassigned
660
Unassigned
670
Unassigned
680
Unassigned
690
Unassigned
700
TESTING/CHECKING
710
Oil Flow
720
Air Flow
730
Fuel Flow
740
Water Flow
750
Electrical/Return to Service
760
Engine
770
Accessory/Bite
780
Pressure Check
790
Leak Check
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
Definition
Removing preservatives, desiccants, etc., from
a unit, part, assembly, etc., prior to installation
or operation.
Applying oil, grease, dry film, or silicon
lubricants on moving parts to reduce friction
or cool the item.
Measuring the flow of oil through components
or compartments under specific conditions.
Measuring the flow of air through components
or compartments under specific conditions.
Function checks and flow measurements
through the part or system being tested.
Function checks and flow measurements
through the part or system being tested.
Functional tests (manual or ATE) of the system
or component as well as measurement of
electrical or electronic parameters designed to
determine whether the item can be returned to
service. May include fault isolation procedures
for components that require close correlation
between test results and fault indications.
Operation of an engine to establish systems
function or operation under specific conditions
to measure performance.
Testing of an accessory to ensure proper
operation or function.
Testing to establish the ability of a normally
pressurized component or system to operate
properly.
Determine the ability of a component or system
to operate without leaking.
33-30-15
Page INTRO-12
30 Mar 2017
Advertisement
