Advertisement
(d)
Honeywell commercial standard numbers are used in the parts lists to identify off-the-shelf
items procured from another manufacturer. A commercial standard number can be a
10 or 11 digit number.
(e)
Nonprocurable part numbers are usually easy to identify and are primarily used for
information purposes. The part numbers NONPROCXXX, ORDERNHA, GAREFXXX,
TUCREFXXX, AIREFXXX, and TORREFXXX are not procurable and should not be
ordered.
1
2
3
(6)
Airline stock number column.
(a)
The airline stock number column has space for customers to use.
(7)
Nomenclature column.
(a)
The indenture code shows the relationship of each item to its NHA.
1
2
(b)
Wherever possible, abbreviations will agree with the ASME Y14.38 specification. The
non-standard abbreviations that spell words are not used.
(c)
The vendor code data are as follows:
1
2
3
4
(d)
A Honeywell specification drawing number will be shown if applicable.
(e)
Refer to this list of possible explanation terms. These terms may be abbreviated.
1
2
3
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
The part number NONPROCXXX is primarily used to sub-divide components into
a logical, easy to use, subgroup. The subgroup is not procurable, but is used to
identify a group of procurable components.
The part number ORDERNHA (Order Next Higher Assembly) is primarily used to
identify nonprocurable details of an assembly.
The part number GAREFXXX, TUCREFXXX, AIREFXXX, and TORREFXXX is
used when a procurable part number exceeds 15 digits. When the part number
GAREFXXX, TUCREFXXX, AIREFXXX, and TORREFXXX appears in the PART
NUMBER column, refer to the nomenclature for the actual part number of the
item desired.
Each item goes in the nomenclature column one indenture (one dot) to the right
of the assembly to which it belongs.
The items at the same indenture are all components of a single assembly or
subassembly. Refer to Figure 10002 for an example of the indenture code system.
The vendors with a code number have the letter V before the number. This code
identifies where to get that item.
No vendor code is shown in the nomenclature column of the DPL if the item is a
U.S. standard part or Honeywell is the vendor.
The vendors with no code number (NCN) are identified by (VNCN__).
The vendors with no code number are shown in the nomenclature column of the
DPL with the vendor's full name and address.
OPTIONAL shows that the part is an optional alternative to other parts in the same
item number variant group.
ALTERNATE shows that the part is an alternative to other parts in the same item
number variant group.
SUPERSEDED BY shows that the part is replaced by the part number or item
number shown and is not interchangeable.
33-30-15
Page 10003
30 Mar 2017
Advertisement
