Advertisement
1.
Planning Data (TASK 33-30-15-99C-802-A01)
A.
Reason for the Job (Subtask 33-30-15-99C-004-A01)
(1)
This section gives schematic and wiring diagrams for the door mounted cargo loading light.
(2)
Use these diagrams as an aid to fault isolate the door mounted cargo loading light.
B.
Job Setup Data (Subtask 33-30-15-99C-005-A01)
(1)
You can use equivalent alternatives for the special tools, fixtures, equipment, and consumable
materials unless specified differently. The user must find equivalent alternatives.
(2)
Refer to Table 2001 for the specified special tools, fixtures, and equipment in this section.
(3)
CAGE codes and manufacturers' addresses are available at https://cage.dla.mil.
Number
Not applicable
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
(4)
Refer to Table 2002 for the specified consumable materials in this section.
Number
Not applicable
(5)
The list that follows identifies Honeywell publications that are related to this section:
• Not applicable.
2.
Schematic and Wiring Diagrams (TASK 33-30-15-878-801-A01)
A.
Schematic Diagrams (Subtask 33-30-15-878-001-A01)
(1)
The schematic diagram for the door mounted cargo loading light is given in Figure 2001.
(2)
Table 2003 shows the schematic diagram in this section.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
SCHEMATIC AND WIRING DIAGRAMS
Table 2001. Special Tools, Fixtures, and Equipment
Description
Not applicable
Table 2002. Consumables
Description
Not applicable
Source
Not applicable
Source
Not applicable
33-30-15
Page 2001
30 Mar 2017
Advertisement
