Download
Share
Print this page
Honeywell S283W703-6 Component Maintenance Manual With Illustrated Parts List
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Lighting Equipment
  5. S283W703-6
  6. Component maintenance manual with illustrated parts list
Honeywell S283W703-6 Component Maintenance Manual With Illustrated Parts List

Honeywell S283W703-6 Component Maintenance Manual With Illustrated Parts List

Hide thumbs

Advertisement

Quick Links

Download this manual
Honeywell International Inc.
550 State Route 55
Urbana, Ohio 43078-1948
U.S.A.
CAGE: 72914
Telephone: 800-601-3099 (Toll Free U.S.A./Canada)
Telephone: 602-365-3099 (International Direct)
Website:
www.myaerospace.com
Component Maintenance Manual
Door Mounted Cargo Loading Light
Part Number
15-0705-5
S283W703-6
15-0705-7
S283W703-17
Export Control
This document contains technical data and is subject to U.S. export regulations. These commodities, technology, or
software were exported from the United States in accordance with the export administration regulations. Diversion contrary
Publication Number D199602000093, Revision 9
© Honeywell International Inc. Do not copy without express permission of Honeywell.
with Illustrated Parts List
Legal Notice
to U.S. law is prohibited.
ECCN: 9E991.
CAGE
72914
81205
72914
81205
33-30-15
Page T-1
Initial 26 Feb 1996
Revised 30 Mar 2017

Advertisement

loading

Related Manuals for Honeywell S283W703-6

Summary of Contents for Honeywell S283W703-6

  • Page 1 United States in accordance with the export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991. 33-30-15 Page T-1 Publication Number D199602000093, Revision 9 Initial 26 Feb 1996 Revised 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 2 Materials represents your acceptance of the terms of this License Agreement. 1. License Grant - If you are a party to an applicable written agreement with Honeywell relating to the repair or maintenance of the subject Honeywell Product, subject to your compliance with the terms and conditions of this License Agreement, Honeywell hereby grants you, and you accept, a limited, personal, non-transferrable, non-exclusive license to use these Materials only in accordance with that agreement.
  • Page 3 U.S. Government. You may not design or manufacture a Honeywell part or detail of a Honeywell part, to create a repair for a Honeywell part, design or manufacture any part that is similar or identical to a Honeywell part, compare a Honeywell part or design of a Honeywell part to another part design, or apply for FAA PMA or other domestic or foreign governmental approval to manufacture or repair a Honeywell part.
  • Page 4 COMPONENT MAINTENANCE MANUAL 15-0705 PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Page 5 Honeywell is a registered trademark of Honeywell International Inc. All other marks are owned by their respective companies. THIS IS THE CMM FOSI - DATE: 20101217 Page T-5 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 6 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page Page T-6 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 7 The block of information often includes the MTOSS code. Revision marks, when provided, identify the location of the change within the block. EFFECTIVITY Page TI-1 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 8 ILLUSTRATED PARTS LIST IPL Figure 1. Updated graphic to show latest drawing data. ILLUSTRATED PARTS LIST IPL Figure 1. Updated Item 105C to show latest parts list data. EFFECTIVITY Page TI-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 9 For each revision, write the revision number, revision date, date put in the manual, and your initials in the applicable column. NOTE: Refer to the Revision History in the TRANSMITTAL INFORMATION section for revision data. EFFECTIVITY Page RR-1 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 10 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page RR-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 11 Date Temporary Removed Revision Page Issue from Number Status Number Date Manual Manual 33-1 Incorporated Revision 8 33-2 Incorporated Revision 9 EFFECTIVITY Page RTR-1 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 12 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page RTR-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 13 Added Cargo Light PN 15-0705-7 26 Feb 2013 Revision 4 Added Acronyms and Abbreviations Table and 23 Jun 2016 Serial Numbers Below 8096 EFFECTIVITY Page SBL-1 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 14 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page SBL-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 15 30 Mar 2017 4003 30 Mar 2017 indicates pages changed or added data indicates a right foldout LF indicates a left foldout EFFECTIVITY 33-30-15 Page LEP-1 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 16 30 Mar 2017 12001 30 Mar 2017 indicates pages changed or added data indicates a right foldout LF indicates a left foldout EFFECTIVITY 33-30-15 Page LEP-2 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 17 References (TASK 33-30-15-99F-803-A01) ..........INTRO-15 Honeywell/Vendor Publications (Subtask 33-30-15-99F-012-A01) ....INTRO-15 Other Publications (Subtask 33-30-15-99F-013-A01) .
  • Page 18 Job Setup (Subtask 33-30-15-000-001-A01) ........3002 EFFECTIVITY Page TC-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 19 Repair of Lens Assembly (Subtask 33-30-15-300-005-A01) ..... . 6007 EFFECTIVITY Page TC-3 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 20 Not Applicable ................14001 EFFECTIVITY Page TC-4 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 21 Detailed Parts List ................10011 EFFECTIVITY Page TC-5 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 22 10008 IPL Figure Door Mounted Cargo Loading Light (GRAPHIC 33-30-15-99B-811-A01) ..10015 EFFECTIVITY Page TC-6 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 23 Consumables ................15001 EFFECTIVITY Page TC-7 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 24 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page TC-8 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 25 An explanation on how to use the ILLUSTRATED PARTS LIST (IPL 33-30-15-10000) is given in the Introduction to that section. Honeywell recommends that you do the tests in TESTING AND FAULT ISOLATION (PGBLK 33-30-15-1000) before you disassemble the unit. These tests can show the condition of the unit or most possible cause of a malfunction.
  • Page 26 COMPONENT MAINTENANCE MANUAL 15-0705 Figure INTRO-1. (Sheet 1 of 2) Geometric Tolerance Symbols (GRAPHIC 33-30-15-99B-801-A01) EFFECTIVITY Page INTRO-2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 27 COMPONENT MAINTENANCE MANUAL 15-0705 Figure INTRO-1. (Sheet 2 of 2) Geometric Tolerance Symbols (GRAPHIC 33-30-15-99B-801-A01) EFFECTIVITY Page INTRO-3 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 28 15001 thru 15999 Rework (Service Bulletin Accomplishment Procedures) 16001 thru 16999 NOTE: The IPL is the last page number block in the document. EFFECTIVITY Page INTRO-4 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 29 Element 5 provides a unique identification for each TASK or SUBTASK number, which is similarly numbered through the first four elements. EFFECTIVITY Page INTRO-5 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 30 Modular section designations appear in the second element of the ATA number for this echelon of disassembly. EFFECTIVITY Page INTRO-6 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 31 Unassigned Miscellaneous Removal of deposits from parts with compressed air, miscellaneous hand cleaning, and various combinations of cleaning procedures. EFFECTIVITY Page INTRO-7 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 32 Penetrant Fluorescent penetrant inspection to detect surface cracks. Magnetic Magnetic particle inspection to detect surface cracks in magnetic materials. EFFECTIVITY Page INTRO-8 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 33 Flame spraying uses a fuel oxygen flame to melt and propel metal onto parts to build up the size or provide surface protection. EFFECTIVITY Page INTRO-9 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 34 Assemble Accessory Assemble accessory components. EFFECTIVITY Page INTRO-10 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 35 Preparation of a unit, part, assembly, etc., for safekeeping from decomposition or deterioration. Includes preparation for storage (applying a preservative layer, desiccants, etc.). EFFECTIVITY Page INTRO-11 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 36 Leak Check Determine the ability of a component or system to operate without leaking. EFFECTIVITY Page INTRO-12 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 37 Airline Maintenance Program (Customer Use) Unassigned Special Equipment Maintenance Identification of tasks to maintain special support equipment. EFFECTIVITY Page INTRO-13 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 38 Standard cleaning, check, repair, and assembly procedures applicable to multiple models can be found in a standard practices manual. Refer to Paragraph 3 (TASK 33-30-15-99F-803-A01). EFFECTIVITY Page INTRO-14 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 39 • To tell Honeywell of a possible data error in a publication. Honeywell Aerospace Contact Team (Subtask 33-30-15-99F-011-A01) If you do not have access to the Honeywell Technical Publications Website, or if you need to speak to personnel about non-Technical Publication matters, the Honeywell Aerospace Contact Team gives 24/7 customer service to Air Transport &...
  • Page 40 INTRO-3 or the equivalent alternative(s). Acronyms and Abbreviations (TASK 33-30-15-99F-805-A01) General (Subtask 33-30-15-99F-015-A01) The abbreviations are used in agreement with ASME Y14.38. EFFECTIVITY Page INTRO-16 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 41 Pub. publication International System of Units shop replaceable unit technical information letter EFFECTIVITY Page INTRO-17 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 42 Process Verification (TASK 33-30-15-99F-806-A01) Verification Data (Subtask 33-30-15-99F-016-A01) Honeywell does a verification of these technical instructions by performance or by simulation of the necessary procedures. Performance shows that the procedures were checked by the use of the manual. Simulation shows that the applicable personnel looked at the procedure in the manual and that the procedure is technically correct.
  • Page 43 Table INTRO-4. Service Information Documents Document Number /Revision Date Put In Document Type Number Title Manual TIL 346 25 Aug 2011 EFFECTIVITY Page INTRO-19 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 44 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page INTRO-20 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 45 Refer to Figure 1 for door mounted cargo loading light. Figure 1. (Sheet 1 of 1) Cargo Light (GRAPHIC 33-30-15-99B-804-A01) Job Setup Data (Subtask 33-30-15-99C-001-A01) The list that follows identifies Honeywell publications that are related to this section: • Not applicable. EFFECTIVITY...
  • Page 46 Door Mounted Cargo Loading Light (Subtask 33-30-15-870-003-A01) The cargo light operates on 28 VDC and is turned ON and OFF by a remote switch inside the cockpit. EFFECTIVITY Page 2 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 47 Number Description Source A-A-59323 cleaning cloth (MIL-C-85043 Type commercially available The list that follows identifies Honeywell publications that are related to this section: • Not applicable. EFFECTIVITY Page 1001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 48 Fault Isolation (Subtask 33-30-15-810-005-A01) Refer to Table 1003 for fault isolation. Refer to IPL Figure 1 for all the item numbers unless specified differently. EFFECTIVITY Page 1002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 49 (equipment is faulty). Replace as necessary. Job Close-up (Subtask 33-30-15-810-006-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 1003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 50 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 1004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 51 Source Not applicable Not applicable Not applicable The list that follows identifies Honeywell publications that are related to this section: • Not applicable. Schematic and Wiring Diagrams (TASK 33-30-15-878-801-A01) Schematic Diagrams (Subtask 33-30-15-878-001-A01) The schematic diagram for the door mounted cargo loading light is given in Figure 2001.
  • Page 52 Door Mounted Cargo Loading Light 15-0705-5, -7 Figure 2001 Figure 2001. (Sheet 1 of 1) Door Mounted Cargo Loading Light Wiring Schematic (GRAPHIC 33-30-15-99B-805-A01) EFFECTIVITY Page 2002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 53 (MIL-C-85043 Type commercially available MIL-T-43435, Type II, Finish E lacing tape (TL090, No. 3) commercially available The list that follows identifies Honeywell publications that are related to this section: • Not applicable. EFFECTIVITY Page 3001 33-30-15 30 Mar 2017...
  • Page 54 If damaged, remove two screws (part of lampholder 105) and the terminals (100) from the lampholder (105). If damaged, remove the nut (120), screw (115) and the terminal (110) from the reflector (135). EFFECTIVITY Page 3002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 55 (10) If damaged, push down on the lampholder retaining button, then slide the lampholder (105) out from the reflector (135). Job Close-up (Subtask 33-30-15-000-003-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 3003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 56 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 3004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 57 Type I) P-C-458 crocus cloth (600 grade) commercially available The list that follows identifies Honeywell publications that are related to this section: • ATA No. 20-00-03 (Pub. No. A09-1100-004), Standard Repair Procedures for Honeywell Avionics Equipment Instruction Manual. EFFECTIVITY Page 4001...
  • Page 58 Armakleen M-HP II aqueous cleaner to remove dirt, dust, and unwanted material. Clean printed circuit boards with a dry, A-A-59323 cleaning cloth to remove dirt or dust. EFFECTIVITY Page 4002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 59 Dry the part with compressed air or clean with an A-A-59323 cleaning cloth and dry the parts in the air. Job Close-up (Subtask 33-30-15-100-005-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 4003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 60 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 4004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 61 Description Source Not applicable Not applicable Not applicable The list that follows identifies Honeywell publications that are related to this section: • Not applicable. Procedure (TASK 33-30-15-210-801-A01) Job Setup (Subtask 33-30-15-210-001-A01) WARNING: BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS’ MATERIAL SAFETY DATA SHEETS.
  • Page 62 Examine the electrical wires for cracks, breaks or deterioration of insulation. If damaged, replace. Job Close-up (Subtask 33-30-15-210-003-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 5002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 63 (0.75 inch (19.1 mm) commercially available wide) A-A-59323 cleaning cloth (MIL-C-85043 Type commercially available ANSI B74.18 aluminum oxide abrasive cloth commercially available (600-grit) EFFECTIVITY Page 6001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 64 1.75 in long (44.5 mm) 7/7 cres wire rope) The list that follows identifies Honeywell publications that are related to this section: • ATA No. 20-00-03 (Pub. No. A09-1100-004), Standard Repair Procedures for Honeywell Avionics Equipment Instruction Manual.
  • Page 65 Refer to SCHEMATIC AND WIRING DIAGRAMS (PGBLK 33-30-15-2000) for wire list tables and for harness, cable, and lead assemblies. The tables give data about wire: • Terminations • Type EFFECTIVITY Page 6003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 66 Clean area to be treated. Refer to CLEANING (PGBLK 33-30-15-4000) for details. Remove cap from the 1132 alodine pen to activate Hold with applicator tip down on the surface to be treated. EFFECTIVITY Page 6004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 67 Replace the damaged terminals (100) and the tubing (TU420) as follows: Cut MIL-T-43435, Type II, Finish E lacing tape or ties on the electrical wires as required. EFFECTIVITY Page 6005 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 68 Use 59250 crimping tool to install the new terminal (110) on the electrical wire. Position the terminal (110) on the reflector (135) and attach with screw (115) and nut (120). EFFECTIVITY Page 6006 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 69 Apply RTV 157 gray, adhesive/sealant to recess on new the lens (45) and position on the retainer (35). Use a clean A-A-59323 cleaning cloth to remove excess sealant. Let air dry for 24 hours. EFFECTIVITY Page 6007 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 70 COMPONENT MAINTENANCE MANUAL 15-0705 Figure 6002. (Sheet 1 of 1) Tubing and Lacing Tape Locations (GRAPHIC 33-30-15-99B-807-A01) EFFECTIVITY Page 6008 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 71 Wrap parts in a clean A-A-59323 cleaning cloth to avoid contamination until ready for assembly. Job Close-up (Subtask 33-30-15-300-007-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 6009 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 72 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 6010 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 73 (TL090, No. 3) commercially available VARGLAS-H-C-2 tubing (TU420) (#7, non-rigid, CAGE: 79074 white fiberglass) The list that follows identifies Honeywell publications that are related to this section: • Not applicable. EFFECTIVITY Page 7001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 74 Put the other end of the lens lanyard (50) on the light subassembly (-75) and attach with a screw (25) and a nut (30). EFFECTIVITY Page 7002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 75 (12) (Post SB 15-0705-33-1) Identify on the cargo light identification plate (10, IPL Figure 1) that MOD 1 is installed. Job Close-up (Subtask 33-30-15-400-003-A01) Remove all tools, equipment, and unwanted materials from the work area. EFFECTIVITY Page 7003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 76 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 7004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 77 This section gives the fits and clearances used when the door mounted cargo loading light was made. Job Setup Data (Subtask 33-30-15-99C-017-A01) The list that follows identifies Honeywell publications that are related to this section: • ATA No. 20-00-03 (Pub. No. A09-1100-004), Standard Repair Procedures for Honeywell Avionics Equipment Instruction Manual.
  • Page 78 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 8002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 79 CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT APPLICABLE. Refer to Table 9002 for the specified consumable materials in this section. EFFECTIVITY Page 9001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 80 W1928 wire braded mesh (3/64 in. (1.2 CAGE: 72914 mm) outside diameter, 1.75 in long (44.5 mm) 7/7 cres wire rope) EFFECTIVITY Page 9002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 81 COMPONENT MAINTENANCE MANUAL 15-0705 The list that follows identifies Honeywell publications that are related to this section: • Not applicable. EFFECTIVITY Page 9003 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 82 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 9004 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 83 COMPONENT MAINTENANCE MANUAL 15-0705 SPECIAL PROCEDURES Not Applicable EFFECTIVITY Page 11001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 84 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 11002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 85 COMPONENT MAINTENANCE MANUAL 15-0705 REMOVAL Not Applicable EFFECTIVITY Page 12001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 86 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 12002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 87 COMPONENT MAINTENANCE MANUAL 15-0705 INSTALLATION Not Applicable EFFECTIVITY Page 13001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 88 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 13002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 89 COMPONENT MAINTENANCE MANUAL 15-0705 SERVICING Not Applicable EFFECTIVITY Page 14001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 90 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 14002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 91 ASTM-D5118 shipping box commercially available The list that follows identifies Honeywell publications that are related to this section: • ATA No. 20-00-04 (Pub. No. A09-1100-001), Handling, Storage, and Shipping Procedures for Honeywell Avionics Equipment Instruction Manual. EFFECTIVITY Page 15001...
  • Page 92 If the door mounted cargo loading light must be in storage for a long time, keep it in a location with a temperature range of -22 to +131 F (-30 to +55 C). Transportation (Subtask 33-30-15-550-005-A01) When equipment is sent to Honeywell for warranty repair, use the approved ATA container, or equivalent. Job Close-up (Subtask 33-30-15-550-006-A01) Remove all tools, equipment, and unwanted materials from the work area.
  • Page 93 COMPONENT MAINTENANCE MANUAL 15-0705 REWORK (SERVICE BULLETIN ACCOMPLISHMENT PROCEDURES) Not Applicable EFFECTIVITY Page 16001 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 94 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 16002 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 95 The NI is an alphanumeric list of all the part numbers shown in the part number column of the DPL. Also included in the index are the Honeywell part numbers that are equivalent to the manufacturer part number. Optional manufacturer part numbers are not included in the index.
  • Page 96 Do not use this data to order a part. Use only the item part number and nomenclature as shown in the DPL. The letter “S” prefix of a part number designates a Honeywell standard part number. These standard part numbers have suffix letters and numbers.
  • Page 97 COMPONENT MAINTENANCE MANUAL 15-0705 Honeywell commercial standard numbers are used in the parts lists to identify off-the-shelf items procured from another manufacturer. A commercial standard number can be a 10 or 11 digit number. Nonprocurable part numbers are usually easy to identify and are primarily used for information purposes.
  • Page 98 Component Maintenance Manuals. These entries are also shown in the INTRODUCTION (PGBLK 33-30-15-0) of this manual under References. Control Source Drawing (CSD) shows the Honeywell part number for the part in the PART NUMBER column and is fully interchangeable.
  • Page 99 The letters RF are used to show an item that is shown in another area with a quantity. EFFECTIVITY Page 10005 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 100 COMPONENT MAINTENANCE MANUAL 15-0705 Figure 10001. (Sheet 1 of 1) DPL Example (GRAPHIC 33-30-15-99B-809-A01) EFFECTIVITY Page 10006 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 101 PRE SPARE PARTS BULLETIN example Quantity example POST SPARE PARTS BULLETIN example RF indicates item referenced elsewhere. NONREPAIRABLE example As required example EFFECTIVITY Page 10007 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 102 COMPONENT MAINTENANCE MANUAL 15-0705 Figure 10002. (Sheet 1 of 1) Nomenclature Indentures (GRAPHIC 33-30-15-99B-810-A01) EFFECTIVITY Page 10008 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 103 FAA regulations, to ship directly to the user. Neither must it be construed as a certification by Honeywell that parts shipped by vendors directly to users will conform to the type design or that such parts are airworthy or safe for installation.
  • Page 104 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 10010 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 105 4. Detailed Parts List Equipment Designator Index EQUIPMENT FIG. GEOGRAPHIC EQUIPMENT FIG. GEOGRAPHIC DESIGNATOR ITEM LOCATION DESIGNATOR ITEM LOCATION NOT APPLICABLE EFFECTIVITY Page 10011 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 106 COMPONENT MAINTENANCE MANUAL 15-0705 Blank Page EFFECTIVITY Page 10012 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 107 1 75 1987 2316-01 1 105A 25-0659-23D 1 45 31-7653-7 1 50A 31-7698-11 1 15 31-7698-9 1 10 36152 1 100 EFFECTIVITY Page 10013 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 108 STOCK NO. ITEM 60-2517-1 1 95 (DELETED) 60-4899-1 1 65 60-4945-1 1 70 60-5150-1 1 105C 60-5151-1 1 105B 61-0457-5 1 50 EFFECTIVITY Page 10014 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 109 COMPONENT MAINTENANCE MANUAL 15-0705 IPL Figure 1. (Sheet 1 of 1) Door Mounted Cargo Loading Light Pages 10015/10016 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 110 LENS ASSEMBLY ......(V72914) - ITEM NOT ILLUSTRATED EFFECTIVITY Page 10017 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 111 TERMINAL ........(V81349) ---*--- - ITEM NOT ILLUSTRATED EFFECTIVITY Page 10018 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 112 LAMPHOLDER ....... . (V72914) (CSD: LH139 V72914) (SUPERSEDES ITEM: 105B) - ITEM NOT ILLUSTRATED EFFECTIVITY Page 10019 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 113 REFLECTOR ....... . . (V72914) (ORDER NHA) (NON PROCURABLE) - ITEM NOT ILLUSTRATED EFFECTIVITY Page 10020 33-30-15 30 Mar 2017 © Honeywell International Inc. Do not copy without express permission of Honeywell.

This manual is also suitable for:

S283w703-1715-0705-515-0705-7