Advertisement
1.
Planning Data (TASK 33-30-15-99C-807-A01)
A.
Reason for the Job (Subtask 33-30-15-99C-014-A01)
(1)
Use these procedures to assemble the door mounted cargo loading light. Do only those
procedures that are applicable to the disassembly done.
(2)
Examine the parts for damage. Refer to INSPECTION/CHECK (PGBLK 33-30-15-5000), for
details.
(3)
Repair the parts before assembly. Refer to REPAIR (PGBLK 33-30-15-6000), for details.
B.
Job Setup Data (Subtask 33-30-15-99C-015-A01)
(1)
You can use equivalent alternatives for the special tools, fixtures, equipment, and consumable
materials unless specified differently. The user must find equivalent alternatives.
(2)
Refer to Table 7001 for the specified special tools, fixtures, and equipment in this section.
(3)
CAGE codes and manufacturers' addresses are available at https://cage.dla.mil.
Number
Not applicable
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
(4)
Refer to Table 7002 for the specified consumable materials in this section.
Number
MIL-T-43435, Type II, Finish E
VARGLAS-H-C-2
(5)
The list that follows identifies Honeywell publications that are related to this section:
• Not applicable.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
ASSEMBLY
Table 7001. Special Tools, Fixtures, and Equipment
Description
Not applicable
Table 7002. Consumables
Description
lacing tape (TL090, No. 3)
tubing (TU420) (#7, non-rigid,
white fiberglass)
Source
Not applicable
Source
commercially available
CAGE: 79074
33-30-15
Page 7001
30 Mar 2017
Advertisement
