Advertisement
Figure 6001. (Sheet 1 of 1) Heat Shrinkable Insulation Sleeving (GRAPHIC 33-30-15-99B-806-A01)
F.
Repair of Lens Assembly (Subtask 33-30-15-300-005-A01)
(1)
Replace the damaged gasket (40, IPL Figure 1) as follows:
(a)
Remove the old gasket (40) from the retainer (35) and discard.
(b)
Remove the old RTV 157 gray, adhesive/sealant residue from the retainer (35). Refer to
CLEANING (PGBLK 33-30-15-4000), for details.
WARNING:
(c)
Apply RTV 157 gray, adhesive/sealant to the new gasket (40) and position on the
retainer (35). Use a clean A-A-59323 cleaning cloth to remove excess RTV 157 gray,
adhesive/sealant. Let air dry for 24 hours.
(2)
Replace the damaged lens (45) as follows:
(a)
Remove the old lens (45) from the retainer (35) and discard.
(b)
Remove old RTV 157 gray, adhesive/sealant residue from the retainer (35). Refer to
CLEANING (PGBLK 33-30-15-4000), for details.
WARNING:
(c)
Apply RTV 157 gray, adhesive/sealant to recess on new the lens (45) and position on
the retainer (35). Use a clean A-A-59323 cleaning cloth to remove excess sealant.
Let air dry for 24 hours.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
ADHESIVE IS HIGHLY FLAMMABLE. AVOID INHALATION OF VAPORS AND
CONTACT WITH SKIN. OBSERVE FIRE PRECAUTIONS.
ADHESIVE IS HIGHLY FLAMMABLE. AVOID INHALATION OF VAPORS AND
CONTACT WITH SKIN. OBSERVE FIRE PRECAUTIONS.
33-30-15
Page 6007
30 Mar 2017
Advertisement
