Advertisement
Term
TR
U.S.A.
USMS
VDC
6.
Process Verification (TASK 33-30-15-99F-806-A01)
A.
Verification Data (Subtask 33-30-15-99F-016-A01)
(1)
Honeywell does a verification of these technical instructions by performance or by simulation
of the necessary procedures. Performance shows that the procedures were checked by the
use of the manual. Simulation shows that the applicable personnel looked at the procedure
in the manual and that the procedure is technically correct. The dates of verification for
this manual are given in Table INTRO-3.
Section
Testing and Fault Isolation
Disassembly
Assembly
Engineering Technical Review
7.
Software History (TASK 33-30-15-99F-807-A01)
A.
Software Data (Subtask 33-30-15-99F-017-A01)
(1)
Not applicable.
8.
History of Changes (TASK 33-30-15-99F-808-A01)
A.
Modification/Configuration History (Subtask 33-30-15-99F-018-A01)
(1)
Not applicable.
B.
Change History for Parts List (Subtask 33-30-15-99F-019-A01)
(1)
Not applicable.
9.
Service Information Documents (TASK 33-30-15-99F-809-A01)
A.
Applicable Service Information Documents (Subtask 33-30-15-99F-020-A01)
(1)
Refer to Table INTRO-4 for other applicable service information documents not listed in
the Service Bulletin List.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
List of Acronyms and Abbreviations (Cont)
Full Term
temporary revision
United States of America
United States Measurement System
volts direct current
Table INTRO-3. Verification Data
Method
Performance
Performance
Performance
Performance
Date
24 Feb 1994
24 Feb 1994
24 Feb 1994
24 Feb 1994
33-30-15
Page INTRO-18
30 Mar 2017
Advertisement
