Advertisement
SPECIAL TOOLS, FIXTURES, EQUIPMENT, AND CONSUMABLES
1.
Planning Data (TASK 33-30-15-99C-809-A01)
A.
Reason for the Job (Subtask 33-30-15-99C-018-A01)
(1)
This section gives the special tools, fixtures, equipment, and consumable materials that you
can use for door mounted cargo loading light maintenance.
B.
Job Setup Data (Subtask 33-30-15-940-001-A01)
(1)
You can use equivalent alternatives for the special tools, fixtures, equipment, and consumable
materials unless specified differently. The user must find equivalent alternatives.
(2)
Refer to Table 9001 for the specified special tools, fixtures, and equipment in this section.
(3)
CAGE codes and manufacturers' addresses are available at https://cage.dla.mil.
Number
59250
Fluke 8010A
M22520/1-01
M22520/1-02
M81969/14-03
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
(4)
Refer to Table 9002 for the specified consumable materials in this section.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
Table 9001. Special Tools, Fixtures, and Equipment
Description
crimping tool
air supply with an air-ionizing gun
attachment or air-ionizing nozzle
for compressed air lines (20 PSI
(138 kPa) maximum)
heat gun
soft-bristle brush
stiff-bristle brush
variable regulated power supply
(0-30 VDC, 6 amperes minimum)
digital multimeter (0 to 200 volts, 0
to 2,000 milliamps, 1.0% accuracy)
crimping tool
positioner
extraction/insertion tool
Source
CAGE: 00779
commercially available
commercially available
commercially available
commercially available
commercially available
CAGE: 89536
commercially available
commercially available
commercially available
33-30-15
Page 9001
30 Mar 2017
Advertisement
