Advertisement
2.
Procedure (TASK 33-30-15-300-801-A01)
A.
Job Setup (Subtask 33-30-15-300-001-A01)
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
CAUTION:
DO NOT DROP OR HIT THE DOOR MOUNTED CARGO LOADING LIGHT DURING
THESE PROCEDURES. THE DOOR MOUNTED CARGO LOADING LIGHT
CONTAINS AN ASSEMBLY THAT CAN BE DAMAGED FROM INCORRECT USE.
DO THESE PROCEDURES IN A CLEAN ENVIRONMENT TO PREVENT DAMAGE
TO MECHANICAL COMPONENTS.
(1)
Obey the precautions.
(2)
Use the same color and type to replace electrical wires. Remove insulation 0.25 inch (6.4 mm).
Use solder to tin the end of the electrical wire and attach it to another component. Refer to
Table 6003 for electrical wire types used in the door mounted cargo loading light.
Door Mounted Cargo Loading Light Electrical Wire
BMS 13-48 T08C01G018000 wire (18 AWG) 12 inch (305 mm) (black)
BMS 13-48 T08C01G018009 wire (18 AWG) 12 inch (305 mm) (white)
BMS 13-48 T08C01G018005 wire (18 AWG) 15 inch (381 mm) (green)
B.
References for Repair (Subtask 33-30-15-300-002-A01)
(1)
These references show where to find repair data that is located in other sections of this manual
and in other manuals. The data in other sections of this manual is necessary for repair of the
door mounted cargo loading light and its primary subassemblies. The data in other manuals
gives procedures that are not included in this manual.
(2)
Refer to SCHEMATIC AND WIRING DIAGRAMS (PGBLK 33-30-15-2000) for reference
drawings for the door mounted cargo loading light and its primary subassemblies. The
drawings give data about:
• Bus wires
• Consumable materials
• Component layout
• Component termination
• Cut runs
• Schematic diagrams.
(3)
Refer to SCHEMATIC AND WIRING DIAGRAMS (PGBLK 33-30-15-2000) for wire list tables
and for harness, cable, and lead assemblies. The tables give data about wire:
• Terminations
• Type
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
Table 6003. Electrical Wire
33-30-15
Page 6003
30 Mar 2017
Advertisement
