Advertisement
I.
Electrostatic Discharge (Subtask 33-30-15-99F-009-A01)
(1)
Touch the items susceptible to electrostatic discharge in accordance with MIL-HDBK-263.
Refer to MIL-STD-1686 for definition of the standards and conditions.
2.
Customer Support (TASK 33-30-15-99F-802-A01)
A.
Honeywell Aerospace Online Technical Publications Website (Subtask 33-30-15-99F-010-A01)
(1)
Go to the Honeywell Online Technical Publications Website at (www.myaerospace.com).
• To download or see publications online
• To order a publication
• To tell Honeywell of a possible data error in a publication.
B.
Honeywell Aerospace Contact Team (Subtask 33-30-15-99F-011-A01)
(1)
If you do not have access to the Honeywell Technical Publications Website, or if you need
to speak to personnel about non-Technical Publication matters, the Honeywell Aerospace
Contact Team gives 24/7 customer service to Air Transport & Regional, Business & General
Aviation, and Defense & Space customers around the globe.
• Telephone: 855-808-6500 (Toll Free U.S.A./Canada)
• Telephone: 602-365-6500 (International).
3.
References (TASK 33-30-15-99F-803-A01)
A.
Honeywell/Vendor Publications (Subtask 33-30-15-99F-012-A01)
(1)
Related Honeywell publications in this manual are shown in the list that follows:
• ATA No. 20-00-04 (Pub. No. A09-1100-001), Handling, Storage, and Shipping Procedures
for Honeywell Avionics Equipment Instruction Manual
• ATA No. 20-00-03 (Pub. No. A09-1100-004), Standard Repair Procedures for Honeywell
Avionics Equipment Instruction Manual.
B.
Other Publications (Subtask 33-30-15-99F-013-A01)
(1)
These publications are standard references. Check for latest version of publication.
• The United States GPO Style Manual (available at http://www.gpo.gov/fdsys/pkg/GPO-
STYLEMANUAL-2008/content-detail.html)
• IEEE Std 260.1, Standard Letter Symbols for Units of Measurement (available from the
American National Standards Institute at http://www.ansi.org)
• ASME Y14.38, Abbreviations for Use on Drawings and Related Documents (available from
the American National Standards Institute at http://www.ansi.org)
• ASME Y14.5, Dimensioning and Tolerancing (available from the American National
Standards Institute at http://www.ansi.org)
• ANSI/IEEE Std 91, Graphic Symbols for Logic Functions (available from the American
National Standards Institute at http://www.ansi.org)
• CAGE codes and manufacturers' addresses are available at https://cage.dla.mil
• IEEE 315/ANSI Y32.2, Graphic Symbols for Electrical and Electronics Diagrams (available
from the American National Standards Institute at http://www.ansi.org)
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
33-30-15
Page INTRO-15
30 Mar 2017
Advertisement
