Advertisement
1.
Planning Data (TASK 33-30-15-99C-805-A01)
A.
Reason for the Job (Subtask 33-30-15-99C-010-A01)
(1)
Use these procedures to find damage or worn parts and parts that show signs of near failure.
B.
Job Setup Data (Subtask 33-30-15-99C-011-A01)
(1)
You can use equivalent alternatives for the special tools, fixtures, equipment, and consumable
materials unless specified differently. The user must find equivalent alternatives.
(2)
Refer to Table 5001 for the specified special tools, fixtures, and equipment in this section.
(3)
CAGE codes and manufacturers' addresses are available at https://cage.dla.mil.
Number
Not applicable
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
(4)
Refer to Table 5002 for the specified consumable materials in this section.
Number
Not applicable
(5)
The list that follows identifies Honeywell publications that are related to this section:
• Not applicable.
2.
Procedure (TASK 33-30-15-210-801-A01)
A.
Job Setup (Subtask 33-30-15-210-001-A01)
WARNING:
BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS' MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
CAUTION:
DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
CAUTION:
DO NOT DROP OR HIT THE DOOR MOUNTED CARGO LOADING LIGHT DURING
THESE PROCEDURES. THE DOOR MOUNTED CARGO LOADING LIGHT
CONTAINS AN ASSEMBLY THAT CAN BE DAMAGED FROM INCORRECT USE.
CAUTION:
DO THESE PROCEDURES IN A CLEAN ENVIRONMENT TO PREVENT DAMAGE
TO MECHANICAL COMPONENTS.
(1)
Obey the precautions.
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
INSPECTION/CHECK
Table 5001. Special Tools, Fixtures, and Equipment
Description
Not applicable
Table 5002. Consumables
Description
Not applicable
Source
Not applicable
Source
Not applicable
33-30-15
Page 5001
30 Mar 2017
Advertisement
