Advertisement
Table INTRO-2. MTOSS Function Code Definitions (Cont)
Function
Code
920
Standard Equipment Maintenance
930
Tool Fabrication
940
Special Tools, Equip, and Consumables Listing
94A
Consumables
94B
Special Tools/Non Std Tools
94C
Fixtures/Test Equipment
94D
Standard Tools
950
Illustrated Parts List (Detailed Parts List)
960
Illustrated Parts List (Equipment Designation
Index)
970
Illustrated Parts List (Numerical Index)
980
Illustrated Parts List (Alternate Vendor Index)
990
Illustrations, Tables, Front Matter, Etc.
99A
Tables
99B
Illustrations
99C
Front Matter Pageblock (TASK Level MTOSS)
Front Matter Task (Collection of Subtask
MTOSS)
99D
Access
99E
References
99F
General/Introduction
H.
Standard Practices Manual (Subtask 33-30-15-99F-008-A01)
(1)
Standard cleaning, check, repair, and assembly procedures applicable to multiple models can
be found in a standard practices manual. Refer to Paragraph 3 (TASK 33-30-15-99F-803-A01).
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
Definition
Identification of tasks to maintain standard
support equipment.
Includes fabricating any tool for which
procedures to use are included in the manual.
Listing of all special tools, standard equipment,
special equipment, and consumables required
to perform maintenance on the unit or
component.
Section of IPL/IPC that contains parts
description and identification in top-down break
down sequence.
Section of IPL/IPC that contains equipment
designators cross-referenced to detailed parts
list.
Section of IPL/IPC that contains an
alphanumeric listing of all parts in the unit
cross-referenced to the detailed parts list.
Optional section of IPL/IPC that contains an
alphanumeric listing of all parts in the unit that
have more than one vendor source.
33-30-15
Page INTRO-14
30 Mar 2017
Advertisement
