How To Verify Operational Status; How To View The User Log Counters - Cisco SCE 1000 Installation And Configuration Manual

Final Tests

How to Verify Operational Status

After all the ports are connected, verify that the SCE 1000 is not in a Warning state.
Step 1 On the SCE 1000 Front panel, examine that the Status LED is flashing green.
To display the operation status of the system, at the SCE 1000# prompt, type show system
Step 2
operation-status and press Enter.
A message displaying the operation status of the system appears. If the system is operating in order, the
following message appears:
System Operation status is Operational.
Examples for Verifying Operational Status
The following example displays a sample output where the LEDs appear red/orange:
SCE 1000#show system operation-status
System Operation status is Operational

How to View the User Log Counters

View the user log for errors that occurred during the installation process.
At the SCE 1000# prompt, type show logger device User-File-Log counters and press Enter.
Step 1
Examples for Viewing the User Log Counters
The following example shows the current User-File-Log device counters.
SCE 1000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log
command to display details about the errors.
Cisco SCE 1000 2xGBE Installation and Configuration Guide
7-4
Chapter 7 Basic SCE 1000 Platform Operations
OL-26790-01