Example; Step 6: Configuring The Rdr Formatter Destination; Step 7: Configuring Access Control Lists (Acls) - Cisco SCE 1000 Installation And Configuration Manual

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration

Example

Following is a sample DNS configuration dialog. The default domain name is pcube.com, and the IP
address of the Domain Name Server is 10.1.1.230.
Would you like to enter the DNS configuration menu? [no]: y
Enable IP DNS-based hostname translation? [yes]:
Enter default domain name []: pcube.com
Enter Primary DNS IP address: 10.1.1.230
Would you like to add another Name Server? [no]:

Step 6: Configuring the RDR Formatter Destination

The SCE 1000 passes Raw Data Records (RDRs) to an external collection system via the
RDR-Formatter. In order for the data to reach the correct location, the IP address of the external
collection system and its port number must be configured.
Enter the RDR formatter configuration menu.
Step 1
Would you like to enter the RDR-formatter configuration menu? [no]: y
Type y and press Enter.
The RDR-formatter destination dialog begins.
Specify the IP address of the RDR-formatter destination.
Step 2
Type the IP address of the RDR-formatter destination and press Enter.
Enter RDR-formatter destination's IP address:
Note that there is no default for this parameter.
Step 3 Specify the TCP port number of the RDR-formatter destination.
Type the TCP port number of the RDR-formatter destination and press Enter.
Note that there is no default for this parameter.
Enter RDR-formatter destination's TCP port number:
Example
Following is a sample RDR-formatter configuration dialog, assigning the IP address and TCP port
number.
Would you like to enter the RDR-formatter configuration menu? [no]: y
Enter RDR-formatter destination's IP address: 10.1.1.230
Enter RDR-formatter destination's TCP port number: 33000

Step 7: Configuring Access Control Lists (ACLs)

•
•
OL-26790-01
Information About Access Control Lists, page 5-14
Examples, page 5-16

Step 6: Configuring the RDR Formatter Destination

Cisco SCE 1000 2xGBE Installation and Configuration Guide
5-13