What To Do Next; Final Tests - Cisco SCE 1000 Installation And Configuration Manual

Chapter 7 Basic SCE 1000 Platform Operations
During the boot process, observe the following LEDs:
Step 4
•
•
•
It takes a several minutes for the SCE 1000 to boot and for the status LED to change from orange to
Note
flashing orange or flashing green.
Step 5 Observe the initialization process. When the system boot is complete, the console screen displays a
script and system banner similar to the following:
Cisco Internetwork Operating System Software
IOS (tm) 7300 Software (C7300-JS-M), Version 12.1(9), CISCO RELEASED VERSION
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 17-MAY-06 01:51 by biff
Image text-base:0x40008970, data-base:0x40BF8000
Step 6 When you start up the SCE 1000 platform for the first time, the system automatically enters the setup
wizard, which prompts you for configuration information for initial system configuration. On the
console terminal, after the system displays the system banner and hardware configuration, you will see
the System Configuration Dialog prompt.
You have the option of proceeding with the setup wizard to configure the system, or exiting from setup
and using configuration commands to configure global (system-wide) and interface-specific parameters.
You do not have to configure the interfaces immediately.

What to Do Next

If the system does not complete each of the steps in the startup procedure, proceed to
"Troubleshooting"

Final Tests

The procedures for performing the final tests to verify that the SCE 1000 is functioning properly are
explained in the following sections:
•
•
OL-26790-01
Both Power LEDs should be green.
Bypass LED should be green while the SCE 1000 is on bypass and unlit when the bypass is turned
off.
The Status LED should be a constant orange while booting. After a successful boot, the Status LED
is flashing green.
for troubleshooting recommendations and procedures.
How to Verify Operational Status, page 7-4
How to View the User Log Counters, page 7-4
Cisco SCE 1000 2xGBE Installation and Configuration Guide
What to Do Next
Chapter 8,
7-3