Managing Sce 1000 Configurations; Viewing Configuration - Cisco SCE 1000 Installation And Configuration Manual

Chapter 7 Basic SCE 1000 Platform Operations

Managing SCE 1000 Configurations

The procedures for managing SCE 1000 configurations are explained in the following sections:
•
•
•

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE platform operation and
configuration. This configuration, referred to as the running-config, is saved in the SCE platform volatile
memory and is effective while the SCE platform is up. After reboot, the SCE platform loads the
startup-config, which includes the non-default configuration as saved by the user, into the
running-config.
The SCE platform provides commands for:
•
•
After configuring the SCE platform, you may query for the running configuration using the command
show running-config. This command displays the non-default running configuration. To view all SCE
platform running configuration, whether it is the default or not, you may use the option all-data in the
show running-config command.
At the SCE 1000# prompt, type show running-config.
Step 1
The system shows the running configuration.
SCE 1000#show running-config#
This is a general configuration file (running-config).
#Created on 15:50:56 CET MON December 11 2005
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 1000#
OL-26790-01
Viewing Configuration, page 7-5
How to Save or Change the Configuration Settings, page 7-6
How to Recover a Previous Configuration, page 7-7
Viewing the running configuration
Viewing the startup configuration
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Managing SCE 1000 Configurations
7-5