Rack-Mounting A Sce 1000 Platform - Cisco SCE 1000 Installation And Configuration Manual

Chapter 4 Installation and Maintenance

Rack-Mounting a SCE 1000 Platform

You can mount the SCE 1000 platform to a 19" rack. There are two standard types of equipment racks,
and the appropriate brackets for each are provided in the enclosed kit.
•
Figure 4-4
•
Figure 4-5
The SCE 1000 mounts to the two front rack posts with brackets that attach to the front of the SCE 1000
The inside width between the two posts or mounting strips (left and right) must be at least 17.3 inches
(44 cm).
Remember to leave a two-inch (5 cm) clearance on both sides of the SCE 1000 and at the rear for
Note
adequate airflow for the inlet and exhaust vents.
Because the inlet and exhaust ports (vents) for cooling air are located at both sides of the chassis,
respectively, multiple SCE 1000s can be stacked in a rack with no vertical clearance.
OL-26790-01
19" rack with front rack posts—The mounting kit includes two mounting brackets as shown in
Figure 4-4.
Mounting Brackets for 2-post Rack
19" rack with front and back rack posts—In addition to the mounting brackets as shown in
Figure 4-5, the mounting kit includes two cross rail supports that the unit slides onto.
Mounting Brackets for 4-post Rack
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Rack-Mounting a SCE 1000 Platform
4-7