Splta - Cisco ONS 15454 Reference Manual

Chapter 2 Procedures and Provisioning
Figure 2-20
(2 times the bandwidth
of the circuit accessed)

2.2.9.9 SPLTA

Split A (SPLTA) indicates that a connection is provided from both the E and F sides of the A transmission
path of the circuit under test to the FAD and split the A transmission path
These modes are similar to the Split E and F modes, except the signals are sent to the RTU, not the NE
signal configuration.
Figure 2-21
AID
Single TAP
Figure 2-22
(2 times the bandwidth
of the circuit accessed)
LOOPF Access Dual TAP
E
BB
A
AID
B
Dual-FAD TAP
SPLTA Access Single TAP
E
A
B
SPLTA Access Dual TAP
E
A
AID
B
Dual-FAD TAP
F
"Mapped"
AID
F
"Mapped"
AID
F
"Mapped"
AID
Cisco ONS SONET TL1 Command Guide, R6.0
2.2.9 Test Access Mode Definitions
(Figure 2-21 and Figure 2-22).
2-21