Cisco ONS 15454 Reference Manual page 125

Chapter 3 TL1 Errors
3.1 Errors
Table 3-6 IDNV Errors (continued)
IDNV Error Messages
Edit Line Code Failed
Edit Line Code on an Invalid Card
Equipment Does Not Support EXPWLEN
Equipment Does Not Support FCS
Equipment Does Not Support PROTID
Equipment Does Not Support PRTYPE
Equipment Does Not Support Payload Type
Equipment Does Not Support RDIRN
Equipment Does Not Support RVRTV
Equipment Does Not Support RVTM
Equipment Does Not Support Regeneration Group
Equipment Does Not Support SUPERBLKS
Equipment Incompatible For Regeneration Group
Frame Format Contains Invalid Data
Frame Format Not Supported On Equipment
GCC Not Supported On CLNT Port
GFP Buffer Out Of Range
High Threshold Should Be Lower Than Extreme High
Incompatible Equipment Type For Protection
Incompatible Equipment Type
Incompatible New Equipment Type
Incompatible Protect Slot For Protection
Interval Out Of Range
Invalid AID For PCA Cross-Connection
Invalid Alarm Message
Invalid Buffer Type
Invalid Card Mode For Equipment Type
Invalid Data For 2F-BLSR
Invalid Data Rate
Invalid Drop Path
Invalid Equipment Type
Invalid Ethernet Frame Size
Invalid Expected Path Trace Message
Invalid Holdoff Timer Value
Invalid Interval
Invalid Log Name
Cisco ONS SONET TL1 Command Guide, R6.0
3-5