Port State Model Provisioning Rules; Sonet-Related Provisioning Rules - Cisco ONS 15454 Reference Manual

Chapter 2 Procedures and Provisioning
•

2.12.17 Port State Model Provisioning Rules

1.
2.
3.
The TL1 commands are:
•

2.12.18 SONET-Related Provisioning Rules

1.
The TL1 commands are:
•
ED-ALS- (OCn, nGIGE, nGFC, OTS, OMS, OCH)
Example of editing ALS attributes:
ED-ALS-OC192::FAC-1-1-1:100:::ALSMODE=Y,ALSRCINT=130,
ALSRCPW=35.1,RLASER=Y:
The enhanced state model port state of primary state=OOS and secondary state=AINS is not
supported for the 1GigE/2GigE payload type.
The working and protect ports can be put in IS/OOS independently.
For the protect TXP card:
Setting the protect trunk port to OOS enables the suppression of alarms on that port and will
a.
enable the card to be used like an unprotected card, but the card still cannot be used for a Y-cable
protection group.
b. Setting the protect trunk port to OOS will not switch off the transmit laser unless both trunk
ports are OOS.
The protect trunk port cannot be IS if there is a loopback or a regeneration group provisioned.
c.
ED-(OCn, nGIGE, nGFC, OCH)
Example of editing Port State:
ED-OC48::FAC-6-1-1:114::::OOS,AINS;
ED-10GIGE::FAC-6-1:114::::OOS,AINS;
ED-OCH::CHAN-6-1:114::::IS;
The SD/SFBER can only be provisioned on the working trunk port (OCH) for the protect TXP card.
Values set at the working port will be reflected on the trunk port.
ED-OCH
Example of editing trunk port attributes:
ED-OCH::CHAN-6-2:114:::RDIRN=W-E,EXPWLEN=1530.32,VOAATTN=2.5,
VOAPWR=7.5,CALOPWR=0,CHPOWER=2.0,NAME="NYLINE",SFBER=1E-5,
SDBER=1E-6,ALSMODE=MAN,ALSRCINT=60,ALSRCPW=35.1,COMM=DCC,
GCCRATE=192K,OSDBER=1E-6,DWRAP=Y,FEC=Y,
MACADDR=OO-OE-AA-BB-CC-DD,SYNCMSG=N,SENDDUS=Y,
RLASER=Y,SOAK=10,OSPF=Y:OOS,AINS;
2.12.17 Port State Model Provisioning Rules
Cisco ONS SONET TL1 Command Guide, R6.0
2-79