Ed-T1; Ed-T3; Ed-Ds1 - Cisco ONS 15454 Reference Manual

2.2.2 TAP Creation and Deletion
•

2.2.2.2 ED-T1

When the ED-T1 command is issued with a specified TACC value for a given T1 port/facility, a dual
facility access group (DFAD) is created by using the specified port/facility and the consecutive
port/facility.
The command in example
Example 2-1
These ports/facilities cannot be used for the creation of cross-connects until the TAP is deleted.
Note

2.2.2.3 ED-T3

When the ED-T3 command is issued with a specified TACC value for a given T3 port/facility, a DFAD
is created by using the specified port/facility and the consecutive port/facility.
The command in
Example 2-2
These ports/facilities cannot be used for the creation of cross-connects until the TAP is deleted.
Note

2.2.2.4 ED-DS1

When the ED-DS1 command is issued with a specified TACC value for a given DS1 facility on a
DS3XM, a DFAD is created by using the specified facility and the consecutive port/facility.
The command in
Example 2-3
These ports/facilities cannot be used for the creation of cross-connects until the TAP is deleted.
Note
Cisco ONS SONET TL1 Command Guide, R6.0
2-8
The TAP number is not editable.
Example 2-1
ED-T1::FAC-1-1:12:::TACC=1;
DV9-99 1970-01-02 03:16:11
M 12 COMPLD
;
Example 2-2
ED-T3::FAC-2-1:12:::TACC=2;
DV9-99 1970-01-02 03:16:11
M 12 COMPLD
;
Example 2-3
ED-DS1::DS1-2-1-1:12:::TACC=3;
DV9-99 1970-01-02 03:16:11
M 12 COMPLD
;
creates a DFAD on FAC-1-1 and FAC-1-2.
creates a T3 DFAD on FAC-2-1 and FAC-2-2.
creates DFAD on DS1-2-1-1 and DS1-2-1-2.
Chapter 2 Procedures and Provisioning