Table 1-5 Blsr Default Values; Table 1-6 Cross-Connections Default Values; Table 1-7 Environment Alarms And Controls Default Values - Cisco ONS 15454 Reference Manual

1.8 Default Values
1.8 Default Values
1.8.1 BLSR
Table 1-5
BLSR
RVRTV
RVTM
SRVRTV
SRVTM
1.8.2 Cross-Connections
Table 1-6
Cross-Connections
CCT
1.8.3 Environment Alarms and Controls
Table 1-7
Environment Alarms and
Controls
OPR-EXT-CONT
RTRV-ATTR-CONT
RTRV-ATTR-ENV
RTRV-EXT-CONT
SET-ATTR-ENV
Cisco ONS SONET TL1 Command Guide, R6.0
1-10
BLSR Default Values
Default
Y
5.0 minutes
Y
5.0 minutes
Cross-Connections Default Values
Default
2WAY for both STSp and VT1 cross-connections
Environment Alarms and Controls Default Values
Default
CONTTYPE is set as one provisioned in the respective AID, there is not
default for it. It is only used as a filter if entered. DUR is always taken as
CONT.
There is no default for CONTTYPE. It is only used as a filter if entered.
There is no default for both NTFCNCDE and ALMTYPE, which are only
used as filters if entered.
CONTTYPE defaults to the conttype associated with the AID.
NTFCNCDE defaults to NR. ALMTYPE defaults to NULL. ALMMSG
defaults to \"Env Alarm Input 1\".
Chapter 1 General Information