Chapter 2
Procedures and Provisioning
2.4.10 1-Way Drop and Continue
The following examples show how to create a 1-way drop and continue cross-connect. The examples use
three nodes (Node 1, Node 2, and Node 3) in a ring configuration
node, Node 2 has the drop and continue, and Node 3 is the destination.
Figure 2-46
Drop and Continue Node
1-Way Drop and Continue
1/1/1
5/1/1
6/1/1
West
East
Node 2
1/1/1
Source Node
5/1/1
6/1/1
West
East
Node 1
5/1/1
West
Cisco ONS SONET TL1 Command Guide, R6.0
2.4.10 1-Way Drop and Continue
(Figure
2-46). Node 1 is the source
1/1/1
Destination Node
6/1/1
East
Node 3
2-39