Ports; Sonet Line Protection; Table 1-10 Ports Default Values; Table 1-11 Sonet Line Protection Default Values - Cisco ONS 15454 Reference Manual

1.8.6 Ports

1.8.6 Ports
Table 1-10
Ports
OC-N Line
EC1 Line
T1 Line (DS1/DS1N)
T3 Line (DS3, DS3E, DS3NE,
DS3XM)

1.8.7 SONET Line Protection

Table 1-11
SONET Line Protection
EX-SW-<OCN>
OC-N Line Protection
OPR-PROTNSW-<OCN> ST (switch type) is optional and for BLSR protection switch only
Cisco ONS SONET TL1 Command Guide, R6.0
1-12
Ports Default Values
Default
DCC defaults to N
TMGREF defaults to N
SYNCMSG defaults to Y
SENDDUS defaults to N
PJMON defaults to 0
SFBER defaults to 1E-4
SDBER defaults to 1E-7
MODE defaults to SONET
PST defaults to OOS
PJMON defaults to 0 (zero)
LBO defaults to 0-225
RXEQUAL is Y
PST defaults to defaults to OOS
LINECDE defaults to AMI
FMT defaults to D4
LBO defaults to 0-133
PST defaults to OOS
DS3/T3 LINECDE defaults to 0-225
DS3 PST defaults to OOS
DS3E/DS3NE FMT defaults to UNFRAMED
DS3E/DS3NE LINECDE defaults to B3ZS
DS3E/DS3NE LBO defaults to 0-225
DS3 of DS3XM PST defaults to OOS
SONET Line Protection Default Values
Default
ST (switch type) is optional and for BLSR protection switch only
ST defaults to BLSR RING switch type
PROTID defaults to the protecting port of the protection group
(SLOT-#(OCN)PORT-#). It is a string that can have a maximum length of
32 characters
RVRTV defaults to N (non-revertive mode)
RVTM defaults to 5.0 minutes
PSDIRN defaults to UNI
ST defaults to BLSR RING switch type
Chapter 1 General Information