Srqn Errors; Table - Cisco ONS 15454 Reference Manual

Chapter 3 TL1 Errors

Table 3-58

SROF Error Messages
Unsupported BLSR STS Path Operation
Unsupported Command Type
Unsupported Element Type
VCG Does Not Exist
VT Cross-Connection Does Not Exist
VT Does Not Exist
VT Does Not Have TAP
VT Path Width Does Not Match
Wavelength Value Not Supported
Working/Peer Card In Use
Wrong Interface Type
Cross-Connect Card Does Not Support VT Cross-Connection
Cross-Connect Card Not Present
XCVXL Card Not Present
Y-Cable Protection Does Not Exist
Table 3-59
SRQN Error Messages
Admssm Not Allowed When SSM Enabled
BLSR Creation Failed
BLSR Deletion Failed
BLSR Does Not Exist
BLSR Editing Failed
Cannot Create Automatic Links
Cannot Edit SENDDUS On Protect Port
Cannot Edit SYNCMSG On Protect Port
DCC Not Allowed In SDH Mode
DCC Not Allowed On Protect Port
DCC not enabled
Data Access Request Failed
Invalid Mode For Current Configuration
Invalid Request
OSC Group Already Exists
OSC Group Does Not Exist
Path loopback already exists
SROF Errors (continued)

SRQN Errors

Cisco ONS SONET TL1 Command Guide, R6.0
3.1 Errors
3-39