Explicit List Of Aids - No Wildcards - Cisco ONS 15454 Reference Manual

Chapter 1 General Information

1.3.2.1 Explicit List of AIDs - No Wildcards

For an explicit list of AIDs on a RTRV-CRS command, an error code will be returned for each AID that
fails validation (for example, the user specifies STS-N-13 when SLOT-N only contains an OC-12) or for
each AID where no matching cross-connection is found. To determine the completion code, follow the
rules from the
PRTL or COMPLD, then a list of matching cross-connections will accompany the response.
1.3.2.2 Implicit List of AIDs - Single AID With Wildcard
If a set of AIDs is implied by the use of the ALL modifier on a single AID, then follow the same AID
expansion rule as defined in the example from the
Wildcard" section on page
1.
2.
3.
RTRV-CRS-STS1:[<TID>]:STS-9-ALL:<CTAG>; where STS-9-ALL maps to STS-9-{1,2,3,10,11,12}
because there is a single-port OC-12 card in Slot 3 with STS-3C defined for STS-9-4 and STS-9-7. The
set is traversed and returns only the STS1 cross-connections that exist using end points in that set. If no
cross-connections are retrieved, COMPLD is returned.
1.3.2.3 Explicit List Grouped With Implicit List
When you have determined the implicit list, apply the rules from the
Single AID With Wildcard" section on page 1-5
"1.3.2.1 Explicit List of AIDs - No Wildcards" section on page 1-5
following logic to the results from the two subsets:
1.
2.
3.
4.
5.
6.
1.4 User Security Levels
User security levels limit the amount of time a user can leave the system idle before the TL1 session is
locked to prevent unauthorized users from making changes. Higher security levels have shorter time
outs. Starting with Release 4.0, time outs can be provisioned (by a Superuser) from CTC. If provisioned,
it only affects users who are not currently logged in. A user that is logged in has to log out and log back
"1.3.1.1 Explicit List of AIDs - No Wildcards" section on page
1-4. Apply the following rules to the set:
If all valid AIDs match, COMPLD is returned with a matching list of cross-connections.
If some valid AIDs match but not all, COMPLD is returned with a matching list of
cross-connections.
If all valid AIDs fail to match, DENY is returned.
Explicit list returns COMPLD, implicit list returns COMPLD, return COMPLD plus matching list
Explicit list returns COMPLD, implicit list returns DENY, return PRTLwith errors plus matching
list
Explicit list returns PRTL, implicit list returns COMPLD, return PRTL with errors plus matching
lists
Explicit list returns PRTL, implicit list returns DENY, return PRTL with errors plus matching list
Explicit list returns DENY, implicit list returns COMPLD, return PRTL with errors plus matching
list
Explicit list returns DENY, implicit list returns DENY, return DENY with errors
"1.3.1.2 Implicit List of AIDs - Single AID With
"1.3.2.2 Implicit List of AIDs -
to the implicit list and the rules from the
to the explicit list. Apply the
Cisco ONS SONET TL1 Command Guide, R6.0
1.4 User Security Levels
1-4. If the result is either
1-5