Sts And Vt Paths; Synchronization - Cisco ONS 15454 Reference Manual

Chapter 1 General Information

1.8.8 STS and VT Paths

Table 1-12
STS and VT Paths
STS Path
VT Path

1.8.9 Synchronization

Table 1-13
Synchronization
BITS
STS and VT Paths Default Values
Default
SFBER, SDBER, RVRTV, and RVTM apply to path protection STS paths
only
SFBER defaults to 1E-4
SDBER defaults to 1E-6
RVRTV defaults to N
RVTM defaults to empty because RVRTV is N when path protection
STSp is created
J1 is implemented on DS1, DS1N, DS3, DS3E, DS3NE, DS3XM, EC1,
OC3, OC48AS AND OC192 card
TRCMODE defaults to the OFF mode
EXPTRC defaults to a copy of the provisioned string or NULL when
TRCMODE is OFF mode
EXPTRC defaults to the user entered string when the TRCMODE is
MANUAL mode
EXPTRC defaults to a copy of the acquired received string or NULL if
the string has not been acquired when the TRCMODE is AUTO mode
INCTRC defaults to the incoming string (NULL) when the TRCMODE
is under OFF mode
INCTRC defaults to a copy of the received string or NULL if the string
has not been received when the TRCMODE is under MANUAL or AUTO
mode
RVRTV, RVTM apply to path protection VT paths only
RVRTV defaults to N
RVTM defaults to empty because RVRTV is N when path protection VT1
is created
Synchronization Default Values
Default
LINECDE defaults to B8ZS
FMT defaults to ESF
SYNCMSG defaults to Y
PST defaults to OOS
Cisco ONS SONET TL1 Command Guide, R6.0
1.8.8 STS and VT Paths
1-13